Engawa

Engawa is the Japanese word for veranda.

The ground on the west end of the shop drops off sharply down into a valley... it is a grand view.  We are going to build a covered deck, an engawa, overlooking the valley.  The deck is 28' by 8', the roof overhangs the deck by 2'.  Access to the deck is by a pair of doors in the shop - eventually there will be a second entrance to the deck on the exterior.

There is a lower deck, as you can see in the sketch at the right that will be for storage of lumber.

We enjoyed the engawa along the garage in Fargo and are looking forward to this new addition.




New post:  2 April 2012  We got the lumber for the lower part of the engawa on the 13th of March.  We started construction the same day, setting posts in footings poured last November.  Carol attached the joist hangers and I cut the joists, the teamwork moved the project along smoothly and by the end of the week we had the structure set in place.

Before the deck boards were screwed to the structure we set some furniture out there and enjoyed the afternoon.  Now with the deck boards fastened in place we enjoy the deck every day.  I had my first beer out there and spilled my first beer out there so the deck has been properly christened.


We received the lumber for the roof structure on the 26th of March, but the delivery was short one of the main beams so we can't start construction until we get that beam, expected to be delivered on the 6th of April.

burning desire

We have been wanting some additional snow cover so we could burn slash piles on our property.  (Slash is the accumulation of limbs, leaves and pine needles left by natural debris and forest management activities.  Slash piles are created by the accumulation of these materials into small manageable piles that can be burned in a safe manner.  Stolen from the Internet.)

On Wednesday we got about 6" of snow but the County didn't give authorization to burn until Friday when an additional inch fell.  (We are supposed to be able to burn with 3" of snow cover.) We got a permit for Saturday and Sunday to burn small slash piles, no more than 8' diameter at the base.  Saturday looked the best, as high winds were expected on Sunday.

I got started lighting piles about 8:30 am on Saturday.  The lighting process uses a mix of 75% diesel fuel and 25% gasoline, the gasoline allows for ease of lighting the pile.  Actually it was not easy to light the piles and after several attempts I resorted to using an old newspaper soaked in the diesel fuel and gasoline mixture.  It didn't take long and I had four towering infernos!  OK, maybe they weren't towering but I had four good fires going.

After about an hour the piles had burned down a bit so we started adding stumps to the fires.  Carol drove the tractor and operated the loader and I got the stumps into the bucket and then directed Carol where to dump the stumps, aiming for the middle of the fire.

The process for burning stumps requires knocking off the dirt and rocks from the roots with a shovel and turning the stumps occasionally.   This is really hot work!  And you have to keep at it.  I was wearing mechanic's gloves with a Velcro wristband - there is a small hole between the glove and the Velcro that exposes the skin and if I wasn't careful to pull down the sweatshirt sleeve was subject to burning that small spot.  I also had to pull up the hood of the sweatshirt to shield my face as I walked into the fire with the shovel.

The fires burned for the afternoon.  About 4 pm I consolidated the burning material from one of the piles into one of the other piles.  Two other piles I had allowed to burn down to about nothing and using the tractor bladed over the 3 spots leaving only one fire burning.  As the sun was setting I dumped a bunch of snow on the glowing embers of what used to be several big stumps.

It was a good day!

I suffered some 1st degree burns on my face and breathed too much super-heated and smoky air.  I was pretty congested and uncomfortable that evening and over night... every breath of air smelled of smoke.

stove disaster

23 February 2012

I was in the shop this evening, had started a fire in the Jotel #1 wood burning stove and was enjoying the fire's radiance, when I heard an odd snap, moments later the stove collapsed, falling backward into a bunch of steel that I had stored behind the stove with a loud crash.  The stove pipe disconnected and smoke started to belch from the open pipe.

Carol appeared in the doorway to the shop asking what had happened and while figuring out what to do gave her a brief explanation... the rear leg broke!!!  Damn cast iron.

I grabbed a bucket of water that I keep close and doused the fire, put a bucket over the stove pipe and opened the windows and the doors.  Elapsed time about one minute.

Tomorrow I will have fabricate a new leg.  I have been using the stove to make the shop comfortable to work in when the sun doesn't shine.  OK, that doesn't make a lot of sense.  The shop has a bank of windows that are oriented to the south and when the sun shines the shop warms up nicely but when the sun doesn't shine or in the evenings I use the stove to keep the shop warm.

Welcome

Welcome to Vern's Michi...

I have been wanting to start a blog for several years but didn't have time.  I retired a little over a year ago and about Thanksgiving I began to think again about writing a blog and made a New Years resolution to start in 2012.  Carol and I packed up all of our belongings and moved just after the first of the year... it has been an adventure, more about that later, but I am finally getting to "blog".

I hope you enjoy.

Vern